基于LabVIEW的壓力脈動分析儀
摘 要：在天然氣運輸前的增壓過程中，由于壓縮機的往復式運動，會產生壓力脈動現象，從而引起管路系統振動。為測試壓力脈動過程，利用LabVIEW設計一種壓力脈動分析儀。該儀器結合虛擬儀器和信號分析處理技術，采集并分析壓力傳感器的數據，可快速檢測出管路系統中各測點的壓力脈動值，找出不合格的測點并采取相應的措施來減小這些測點處的振動值，保證安全生產。該壓力脈動分析儀已在多處天然氣增壓站投入使用，取得了良好的使用效果。
關鍵詞：壓力脈動；LabVIEW系統；虛擬儀器；信號處理
中圖分類號：TP311.59；TH823+.2；TM930.113；TP274+.2 文獻標志碼：A 文章編號：1674-5124（2013）05-0080-03
Pressure fluctuation analyzer based on LabVIEW
YU Gao-yang1， WANG Jian1， FENG Cheng-ke2
（1.Test center，Chongqing University，Chongqing 400044，China）
2.Chongqing Gas District of Southwest Oil and Gas Company，Chongqing 400021，China）
Abstract: The pipeline of the CNG transportation system often vibrates since pressure fluctuation for the reciprocating motion of the compression engine in the pressurization process. In order to measure pressure fluctuation， an analyzer based virtual instrument and signal processing was developed with LabVIEW. The pressure fluctuation of pipeline system can be test rapidly through collecting and analyzing the data from the pressure sensor. The point of pressure dissatisfaction can be found by comparing with API618， and further steps to reduce vibration can be followed up to avoid accident. This analyzer has been used in some CNG stations and achieved good results.
Key words: pressure fluctuation； LabVIEW； virtual instrument； signal processing
